Best Oil Filter Adapter Fittings

Improved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN

  • 100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
  • Slim design provides maximum clearance for aftermarket headers.
  • Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
  • 6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
  • Made in USA. Lifetime manufacturer's warranty.
Check Stock

Air Compressor Water Separator, Heavy Duty Air Compressor Filter provides Clean Dry Air. Compressed Air Dryer with Drain Valve by LE LEMATEC

  • Le Lematec air compressor filter oil and water separator works with any air compressor and air tool. The air filter traps dirt oil and moisture as a receiving filter for air tools..
  • Keep air tools in tip top working condition and prevent costly repairs by preventing dirt and moisture from damaging your air tools and accessories.
  • LE Lematec air dryer is a heavy duty inline air filter. Made from aluminum with solid brass fittings, it offers excellent reliability. Features a 1/4 inch air inlet female and 1/4 male..
  • Air compressor dryer provides quick and easy cleaning with its push button drain valve. Just push the button to eject oil dirt and water from the filter..
  • The inline air filter works under standard operating pressure of 90 PSI up to 150 PSI maximum..
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock

Dorman 918-258 Automatic Transmission Oil Cooler Compatible with Select Dodge Models

  • Jeep Models.Only for 3.6L 6 cyl (V6) Engine.(For more detailed models and years, please refer to product details)..
  • OEM:68105583AF,68105583AE,68105583AA,68105583AB,68105583AC,68105583AD,68105583A,MS97204,MS19879,MS97205,MS19878..
  • FUNCTION:The engine oil is filtered through the Oil filter housing adapter assembly,It keeps the engine clean and cool, extend the service life..
  • ADVANTAGES:This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • SUPPORT:At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems..
Check Stock

KJ Carburetor Air Filter for Husqvarna 235 240 235E 240E 236 236E Chainsaw Carb Kit

  • ☆ production: Products are produced with high quality materials and unique processing, better delayed service life and stable performance. .
  • ☆ Fittings code: Jonsered CS2234 CS2238 CS2234S CS2238S, Red Max GZ380 574719402 545072601 586936202 545061801,ZAMAM C1T-W33C.
  • ☆ Compatible with the type: Husqvarna 235 235E 236 236E 240 240E chainsaw.
  • ☆ Accessories: Carburetor *1 oil pipe *1 paper pad *3 Adjustable screwdriver *1 oil bubble *2 oil filter *2 Spark plug *1 air filter *1.
  • ☆ Purchase information: Please confirm the product before placing an order.
Check Stock

KIPA Oil Filter Adapter Replace for Small Block Chevy V8 Engines SBC BBC Spin On Bypass 305 307 327 350 400 396 402 427 454 # 3952301

  • Top Quality Well-Machined KIPA Oil Filter adatper, keep your vehicle oil cooler intact. Bolts right up and fits.
  • MPN: Directly replacement Part Replace for Part # 3952301.
  • Fitment: This oil filter adapter replaces for the Chevy Small and Big Block V8 Engines SBC BBC 305 307 327 350 400 396 402 427 454. Please do match the OE Part Number and the Adapter structure..
  • It Fits the following engines using a spin on filter wix 51069,AC PF25,Morose 22459 from 1968-1986.
  • Important Notice: Two bolts as pictured comes with the adapter, there is no gasket needed to install this part. If you put a gasket on this product it may come apart and get sucked into your motor causing oil pressure loss and damaging the engine badly if not destroying it..
Check Stock

Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Compatible With 2011-2013 Chrysler 200/300,Dodge Journey Charger Caravan And More,Replaces 5184294AE

  • ... Chrysler 300, 2011-2013 Chrysler Town and Country, 2011-2013 Dodge Avenger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Charger, 2011-2013 Dodge Journey, 2011-2013 Dodge Caravan, 2011-2013 Dodge Durango, 2013 Ram 1500, 2012-2013 Ram C/V Base. ( Only for 3.6L 6 cyl engine)!.
  • 【Advantage】- Oil filter housing adapter assembly comes with a complete set of accessories required for installation , And comes with pre-installed oil filter, fluid temperature sensor, oil pressure sensor, Bypass Valve & Spring and NBR sealing ring. also comes With 12 pieces of Intake Manifold Plenum Gasket Set for a complete and worry free installation. In addition, one high-quality oil filter is given as a gift, so that you can use it next time you change the oil filter..
  • 【High performance】 -The engine oil is filtered through the Oil filter housing adapter assembly, remove foreign particles it also cool down the oil that enters the engine to maintain the clean and efficient operation of the engine! quality materials used, meets or exceeds OEM standards, 100% tested before shipping. Even though it is not a genuine Mopar oil filter housing, but it works even better and last longer!The price is only a small part of the dealer!.
  • 【After-sales service】-Professional....
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock