Best Battery Power Adapter

Hanatora Battery Home & Car Charger for DJI Mavic 2 Zoom/Pro and Remote Controller,5 in 1 Charging Hub with Charging,Discharging and Storage Charging

  • Special designed for Mavic 2 series battery: DJI Mavic 2 Pro,Mavic 2 Zoom,Mavic 2 Enterprise.
  • Not for Mavic Pro(1st generation),Mavic Pro Platinum.
  • [Multifunctional] The charger comes with home power adapter and car charger adapter, you can charge your batteries at home or in your car.
  • [Fast Charging] Support 1-4pcs batteries and 1 remote control charging. Automatically adjust battery charging current, it take about 100-120 minutes full charging all 4 batteries by home power adapter. It will take a longer time to charge the Intelligent Flight Battery and remote controller together..
  • [Battery Safety Storage] When the battery is ready to stored for a long time, it is necessary to keep the power at about 50%-60%. Full power and low power storage will cause battery damage. In the storage mode, this charger can make the battery's power at around 50%-60%, and the battery storage is safer..
  • [Discharge Maintenance Battery]After 20 cycles of Mavic 2 battery use,it is suggested that the battery should be completely emptied and then charged to 60%, which can extend the service life. This discharge function can completely empty the battery to 0%.
  • Input: AC 110-240V or DC 11-14V, Output: 17.6V 12A (3A on each battery) ,USB output:5V 2A.
Check Stock

USB Battery Adapter for Craftsman C3 19.2 Volt Lithium Cordless Power Tools, Convert Black and Decker/Stanley/Porter Cable 20V Lithium Battery to Craftsman 19.2V C3 Lithium-Ion Battery Converter

  • 【Using Notes】 1. Adapter Can NOT be used for power tool battery charging, it NOT fit into any chargers when adapter with battery. If you need to charge your battery, please use the original brand battery chargers.
  • 2. Please remove it from the battery when not in use, Safe to use.
  • 【Adapter Converter Feature】: This Adapter Converter can make Lithium batteries of the listed brands compatible with the tools of the craftsman c3 19.2v max system. and let you enjoy the benefits of extended lithium ion battery operation time on existing 19.2-Volt instruments. Replacement Battery Compatible with Craftsman 19.2V C3 130279005 130279003 130279017 130235021 315.113753 315.114850 315.114852 315.11485 315.115410 1323903 1323517 11375 11376 Cordless Tools..
  • 【Convert 20V Li-ion Battery Models】: The bottom of this 20V lithium battery adapter can compatible with Porter-Cable 20V Lithium Battery(PCC685L, PCC680L), or Compatible with Black&Decker 20V Lithium Battery(LBXR20, LBX20, LB2X4020), or Compatible with Stanley 20V Lithium Battery(FMC680L)..
  • 【Converter Advantages】: With USB charge port (output: 5V, 2.1A max), can be used for charging smart phone,camera,smartwatch, shaver and other low-power electronic appliances. NOT fast charing port..
Check Stock

SANIKLITE Power Wheels Battery Adapter for Makita 18V Battery,Power Tool Battery Converter Dock Power Connector with 14 Gauge Wire, Ideal for RC Toys,Robotics and Work Lights

  • ★【Perfect Compatibility】Battery Adapter for makita battery 18V adopt Superb craftsmanship which ensure the size measured and controlled strictly, so that the battery converter compatible with 18V battery perfectly and stable lock on the battery..
  • ★【Quality Material】Power wheels battery adapter for makita comes with black & red 14 guage tinned copper wires,protects them from corrosion and making it easier to solder.Covers with teflon FEP which resists high & low temperature, water, oil, chemicals and abrasion. Morever, Battery converter constructs with premium silicone rubber insulation which will not melt when exposed to high temperatures.(Note:Max Heat Resistance temperature Within 200°C ).
  • ★【Easy To Use】Upgrade your power wheels/toys or robotics diy which is easy to use. As long as the battery is installed into the connector, it can be easily to connect the battery to your devices. Just need to move the power mount connector to the inside of the groove gently, then install the battery into the connector.Meanwhile, battery adopter has compact size and lightweight, which is convenient to carry and will not bring you any burden..
  • ★【Wide Usages】Power battery connector is compatible with most types of makita 18V lithium batteries ....
Check Stock

Power Wheel Adapter with Fuse & Switch, Secure Battery Adapter for Ridgid AEG 18V Hyper Lithium Battery, with 12 Gauge Wire,Good Power Convertor for DIY Ride On Truck,Robotics,RC Toys and Work Lights

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily. Compatible with Ridgid AEG 18V Hyper series lithium-ion batteries..
  • Safety Design: For your safety, our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adapter from the battery, Please press down the buckle of the battery, then remove it. ), there are 2 fixing screw holes on the adapter for easy fixing with screws..
  • Versatility: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 18A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High-quality: Made of high-quality ABS Plastic,injection-molded, excellent scratch&shock resistance and chemical resistance and is impervious to heat, moist....
Check Stock

18V Doorbell Transformer, LANMU Power Adapter Compatible with Nest Hello Video Doorbell, Blink, Arlo and SimpliSafe Video Doorbell (16.4ft/5m)

  • Connecting Your Doorbell: LANMU Doorbell Power Supply Adapter can connect your Doorbell to the power adapter directly,forget the hassle of charging your battery and let your Nest Hello Video Doorbell continuous operation..
  • Easy Installation: Install through door hole and simply connect the wire to your Nest Doorbell,install and setup can be completed in a few minutes,no need for an existing doorbell or new wiring,can be installed on any door..
  • It's the most simple and convenient way to operate your doorbell,with the LANMU Power Adapter,you can let your Nest Hello Video Doorbell continuously running and no need to remove your doorbell for charging the battery..
  • With an AC output of 18V 450mA and super long 16.4 ft cable,no worries about the power adapter isn't long enough to connect the outlet to the doorbell. Perfectly compatible with Nest Doorbell(Battery),Nest Hello Video Doorbell,Arlo Video Doorbell, Eufy Video Doorbell, Blink Video Doorbell,Simplisafe Video Doorbell,Wyze Video Doorbell and other doorbells required 18V transformer..
  • Security and Guarantee: The LANMU Power Supply Adapter can help extend the working time of the battery and reduce power consumption and we offer 2 Years Warranty,let you can rest assured use..
Check Stock

18V Doorbell Transformer, LANMU Power Adapter Compatible with Nest Doorbell, Nest Hello Video Doorbell, SimpliSafe and Blink Video Doorbell (16.4ft/5m) (Black)

  • Connecting Your Doorbell: LANMU Doorbell Power Supply Adapter can connect your Doorbell to the power adapter directly,forget the hassle of charging your battery and let your Nest Hello Video Doorbell continuous operation..
  • Easy Installation: Install through door hole and simply connect the wire to your Nest Doorbell,install and setup can be completed in a few minutes,no need for an existing doorbell or new wiring,can be installed on any door..
  • It's the most simple and convenient way to operate your doorbell,with the LANMU Power Adapter,you can let your Nest Hello Video Doorbell continuously running and no need to remove your doorbell for charging the battery..
  • With an AC output of 18V 500mA and super long 16.4 ft cable,no worries about the power adapter isn't long enough to connect the outlet to the doorbell. Perfectly compatible with Nest Doorbell(Battery),Nest Hello Video Doorbell,Blink Video Doorbell, Arlo Video Doorbell, Eufy Video Doorbell, Simplisafe Video Doorbell and other doorbells required 18V transformer..
  • Security and Guarantee: The LANMU Power Supply Adapter can help extend the working time of the battery and reduce power consumption and we offer 2 Years Warranty,let you can rest assured use..
Check Stock

Doorbell Transformer, Briidea 24V 40VA Thermostat and Door Transformer, Compatible with Nest, Ecobee, Sensi and Honeywell Smart Thermostat, Nest, Ring Video Doorbell

  • Connecting Your Doorbell: LANMU Doorbell Power Supply Adapter can connect your Doorbell to the power adapter directly,forget the hassle of charging your battery and let your Nest Hello Video Doorbell continuous operation..
  • Easy Installation: Install through door hole and simply connect the wire to your Nest Doorbell,install and setup can be completed in a few minutes,no need for an existing doorbell or new wiring,can be installed on any door..
  • It's the most simple and convenient way to operate your doorbell,with the LANMU Power Adapter,you can let your Nest Hello Video Doorbell continuously running and no need to remove your doorbell for charging the battery..
  • With an AC output of 18V 450mA and super long 16.4 ft cable,no worries about the power adapter isn't long enough to connect the outlet to the doorbell. Perfectly compatible with Nest Doorbell(Battery),Nest Hello Video Doorbell,Arlo Video Doorbell, Eufy Video Doorbell, Blink Video Doorbell,Simplisafe Video Doorbell,Wyze Video Doorbell and other doorbells required 18V transformer..
  • Security and Guarantee: The LANMU Power Supply Adapter can help extend the working time of the battery and reduce power consumption and we offer 2 Years Warranty,let you can rest assured use..
Check Stock

Arlo Pro Battery TAKEN 2-Pack 2440mAh Arlo Batteries with LCD Dual Arlo Battery Charger Camera Rechargeable Battery for Arlo Pro and Pro 2(NOT Compatible with Arlo Ultra 2, Arlo Pro 3)

  • Long Lasting Rechargeable Batteries – Taken arlo pro battery deliver the long-lasting power and performance, you can use your camera wherever you want. (Battery life varies based on settings, usage & temperature)..
  • Standard Compatibility – These arlo batteries only fit for Arlo Pro, Arlo Pro 2 Camera and power the surveillance camera.the size is the same as the original Arlo battery (NOT for Arlo Ultra, Arlo Pro 3)..
  • Dual Arlo Pro 2 Charger – Arlo battery charger can charging two batteries at the same time, effectively saving charging time. arlo pro charger has both USB-C and USB micro connectors can connect with your laptop, AC adapter, car adapter, power bank, etc, It is 20% faster when charging one battery and LCD Display Screen shows the battery’s power of each battery..
  • High Capacity – 2440mAh lithium-ion arlo battery a-1 makes your Camera run longer provides uninterrupted performance for your home security..
  • LCD Display Arlo Pro Battery Charger Station – Taken Arlo charger LCD display shows the charging status of each battery, control the power of each battery at any time, and refuse to worry about no power..
  • Multiple Charging Options – The arlo pro charger has both USB-C and USB micro connectors, USB-C port. it can charge wher....
Check Stock

tegongse LR14 C Battery Eliminator USB Power Supply Replace 1 to 4pcs 1.5V C Cell Battery

  • Replace 1 to 4pcs C LR14 Size battery USB power supply cord. This eliminates the need for 1 to 4pcs C LR14 batteries..
  • No need to change battery frequently: With this C battery USB Cable,you don't need to buy a lot of replacement batteries when the batteries run out(need use your own USB adapter).
  • Power supply from USB charger,power bank,car charger and more USB adapter..
  • 3V with one C dummy fake battery,4.5V with two C dummy fake battery,6V with three C dummy fake battery(as conductor,no power ).
  • Some mobile power bank sources have an automatic power-off function, and the output current of 90mA will automatically power off..
Check Stock

AC 100-240V to DC 12V 5A Power Supply Adapter Switching 5.5x2.1mm for CCTV Camera DVR NVR Led Light Strip UL Listed FCC

  • [COMPATIBLE WITH MODEL:] LP E12 dummy battery work for Canon EOS M50 Mark II (mark 2), M50, M10, M2, M, M100, M200, Kiss M, Kiss M2 Mirrorless Digital Cameras..
  • [PRODUCT FUCTION:]CA-PS700 external power adapter and DR-E12 DC coupler (Connector) Kit replaces LP-E12 Battery and LC-E12 Charger, equip with ACK E12 AC / DC power adapters, continuously charge for your camera..
  • [STEPS FOR USAGE:] First Remove the Canon original LP E12 battery, Replace with TKDY DR E12 virtual battery, and cover the battery compartment cover, Connect the adapter, Connect the power outlet..
  • [VERY IMPORTANT:] The camera battery compartment cover has an interface for connecting the adapter, You must lift the rubber flap covering the hole and plug the adapter through it. (The operating procedure instructions are enclosed in the box.).
  • [Advantages:] Replaces the canon eos webcam accessories, it is a tool designed for long-term studio shooting. When you need to take photos or videos continuously, you don't have to worry about the sudden power failure of the camera..
Check Stock

Nitecore i2 Intellicharge Charger for 18650 AAA AA Li-Ion/NiMH Battery

  • FAST AND EFFICIENT CHARGING- Reach a maximum total of 2000mA when using a 2A output USB power adapter. Connect a quick charge (QC) power adapter for high speed charging and reach a single slot max output of 3000mA..
  • LCD DISPLAY- Reports key realtime information such as battery health, charging status and charging mode..
  • INTELLIGENT CHARGING- Automatically selects appropriate charging current and voltage..
  • BATTERY TYPES & SIZES - Compatible with various battery types (li-ion/imr/lifep04/ni-cd/ni-mh) and common battery sizes including (18650, 16340,14500)..
  • QC3.0 CHARGING ADAPTER INCLUDED - Charge your batteries quickly with the included LumenTac QC 3.0 charging adapter.
Check Stock

USB Battery Adapter for Craftsman C3 19.2V Cordless Tools, Converter for Dewalt 20V MAX and for Milwaukee M18 18V Lithium Battery to Craftsman 19.2 Volt Lithium Ion Battery Adaptor, w/ 5V 2A USB Port

  • 【Adapter Converter Feature】: This QINIZX battery adapter can compatible with Dewalt 18V 20V max and compatible with Milwaukee 18V Li-ion Slide Battery to make them apply to Craftsman 19.2Volt C3 Cordless Tools, This converter can let you enjoy the benefits of extended run-time of Li-Ion Batteries on your existing 19.2V tools. 【Note】: When installing the battery at the bottom of the adapter, please use a larger force to press the button of the adapter, otherwise the battery will not be installed, thank you for your understanding..
  • 【Applicable Battery Models】: The bottom of this adapter can compatible with Milwaukee 18V lithium battery: M18, 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828, 48-11-1840, 48-11-1841, 48-11-1850, 48-11-1852, 48-59-181, 48-59-1850,982-2, 4932352071, 4932430063, C18B, Li18, M18B, M18B2, M18B4, M18BX, XC.
  • and also Compatible with Dewalt 20V MAX XR lithium battery: DCB200, DCB201, DCB203, DCB204, DCB205, DCB206, DCB181, DCB180, DCB184, N123283, N123282, DCB201-2, DCB181-XJ..
  • 【Replace 19.2Volt NI-MH Battery】: Replacement for Craftsman C3 19.2V batteries 11375, 11376, 130279005, 11375,11376,130279003,1323903, 1323517,315.114480, 315.114852,315.101540, 15.11448, 315.115410 130239006, 130235021. Compatible ....
Check Stock